rigtig181

earrings holder

by rigtig181 on
earrings holder - 3D design by rigtig181

A flower to hold earrings, with a cone for rings.

Full size is 162.5 x 163 x 74.4 mm, and takes about 15 hours to print. (See screen images below for Cura setup.)

At 60%, holes are 2mm diameter and bounding box is 97.5 x 97.8 x 44.6 mm, bringing print time down to about 4.5 hours.

Grey image is from MeshLab.

Being printed on Cocoon, in translucent purple ABS (photo to come)

LICENSE
Creative Commons Attribution-NonCommercial-ShareAlike license (CC BY-NC-SA)
Household
Jewelry
3D printing
homedecor
holder
jewelry
printable